Smartline Tuscan 30-Foot Round Pool Liner | UniBead Style | 52-Inch Wall Height | 25 Gauge Virgin Vinyl Material | Strong and Durable Liners | Designed for Steel Sided Above-Ground Swimming Pools

Brand: Smartline

Color: Tuscan

Features:

• PRETTY PLEASING PATTERN – The combination of triangle and rhombus shaped stones come together to form a chevron wave pattern atop the watery field on this idyllic Tuscan liner print. The North American cut material is hand-folded to prevent permanent creasing and excess wrinkling. Before installing, lay the liner out in the sun for a minimum of one hour to warm up the vinyl ensuring it is able to stretch when adding water. The best temperatures to install would be between 70-80 degrees.
• MEASURE TWICE, BUY ONCE – Whether installing for the first time, or replacing an existing liner, the Tuscan pattern offers durability while not breaking the bank. Be sure to check the measurements of your swimming pool to assure the correct size is purchased. Pool height is determined by measuring the outside wall from the ground to underneath the top rail. Round pool size is determined by measuring from the center point wall to wall in order to obtain the diameter.
• INSTALL IN A SNAP OR A HOOK – This 30′ round unibead style liner works with pools with flat-bottoms measuring 52″. For an overlap style pool, simply open up the j-hook portion and slip this over the pool wall. For beaded style pools, use the standard bead after removing the j-hook portion along the score or groove mark. This will leave only the standard bead which is inserted into the bead receiver opening. ***Will not work with Intex or Pop-Up pools***
• STAY COOL IN THE POOL – Enjoy the warm weather while spending quality time with family and friends. Your backyard pool will surely become the place to be during those hot summer days. Stay cool in more ways than one with the Tuscan liner.
• HIGH QUALITY MATERIAL – Swim carefree knowing your liner can tough it out through abrasion, chemicals and UV fading thanks to the use of Lamiclear technology. The layers are made of an acrylic top coat, a UV resistant print layer, and a 100% virgin vinyl base. This material is then welded and cut for a flawless fit and finish. A 25-year limited warranty is included protecting against defects in material and workmanship.

Details:

The Unibead bead is actually both a J-hook & standard bead. To use as a J-hook simply slip bead over pool wall. To use as a standard bead the hook portion is removed at the score mark (groove) leaving only the standard bead which clips into the groove on the bead receiver.

Liner Knowledge:

The Unibead bead is actually both a J-hook & standard bead. To use as a J-hook simply slip bead over pool wall. To use as a standard bead the hook portion is removed at the score mark (groove) leaving only the standard bead which clips into the groove on the bead receiver.

• Does not require the presence of a bead receiver
• Lay out in the sun for at least 1-hour prior to installing
• Air temperature should be at least 70-degrees when putting in
• Be sure to measure your pool and wall height prior to ordering
• Will NOT work with Intex or Pop-Up pools

Liner Specifics:

• Size: 30′
• Wall Height: 52″
• Shape: Round
• Connection: Unibead
• Gauge: 25
• Material: 100% Virgin Vinyl

Liner Material:

• 100% virgin vinyl construction
• Our liners have been vulcanized, high pressure heat bonded and vacuum sealed
• Material has been RF vinyl welded with lap welded seams
• Durable liners free of impurities

Liner has a 25-year limited warranty against manufacturer material defects